Reyes-SE 24" Special Edition
Reyes-SE 24" Special Edition
IN STOCK BIKES SHIP WITHIN ONE WEEK OF PURCHASE
Ages 7+
Minimum inseam 23.5” (stand-over height)
Saddle height from ground: adjustable from 25.5” to 30.5”
Front and Rear V-Brakes
Single Speed Gearing
Lightweight - 19.5 lbs
$49 FedEx Shipping (UPS Canada $105)
Lifetime warranty on frame and fork
Every bike purchase comes with GrowPello
Please send us an email if you’d like to use the Reyes SE at your school, Non-Profit and bulk ordering discounts available; info@pellobikes.com
*Please note: Bike spec may vary from photos, for the most up to date specs please see the table below
The Reyes-SE (Special Edition) is a special blend of simplicity and geometry that is home on your local trails, pump track or the neighborhood route to a friend's house.
We took the simplicity of our 20” Reddi and merged it with the geometry of our 24” Reyes to create a bike that is as easy to ride as it is to maintain...we call it the Reyes SE (Special Edition). With the SE’s unique blend of Pello DNA it retains the quality you find in all Pello Bikes. Thanks to its all aluminum construction the SE is super lightweight and easy to put on your car’s bike rack or fly through the neighborhood. The V-Brake’s from Tektro are stop worthy for any rider and the single speed drivetrain keeps pedaling smooth and simple.
This Special Edition Reyes is only available in Orange while supplies last.
**Each bike comes with a bell, spare tube, quick release seat collar, 5&6mm hex keys, presta valve adapter, owner’s manual, stickers, and our pre-ship checklist (our way of checking each bike before it leaves our shop to ensure everything is good to go)
Bikes arrive at your door 95% assembled (unpack and assemble front wheel, handlebar, pedals and saddle)
Shipping (Normally 1-3 days from placing your order, all bikes are shipped either FedEx or UPS ground from our Richmond, VA location)
Once your bike is ready for shipment you will receive an email with tracking number so you can follow it as it makes it’s way home
Specifications | |
---|---|
Weight / 19.5 lbs (w/pedals & bell) | Brake Levers / Tektro-child proportional, aluminum |
Frame / 6061 aluminum | Rims / Alex-aluminum-Double Wall, 28h |
Fork / Lightweight aluminum | Spokes / Stainless Steel, black, Aluminum nipples |
Headset / 1-1/8" threadless, cartridge, w/ seals | Hubs / Aluminum / Quick release with seals, Front and rear |
Stem / Aluminum Ahead 70mm, 17° | Tires / CST C1382, 24x1.95, presta tube |
Handlebar / Aluminum 0mm rise, 600mm wide 11 degree sweep | Cranks / Pello custom-aluminum 3-piece 140mm; BCD 104mm |
Grips / Pello lock-on, closed end | Chainring / Aluminum 32t with double aluminium chain guard |
Saddle / Cionlli-child proportional saddle sizing | DNP Freewheel / 18 tooth |
Seatpost / 27.2x300mm, Aluminum micro adjust w/QR seat collar | Bottom Bracket / Cartridge with sealed bearings |
Brakes / Tektro-V-Brake | Pedals / Child proportional resin flats with ball bearings |
Gearing / Single Speed (18t rear freewheel) (3.9 Gain Ratio) | Shifter / Single Speed |